The XC-80 Compensator can also be found in the XC-80 Compensator Kit.
The XC-80 compensator is a crucial factor in your XL system’s linear measurement accuracy. Featuring “intelligent sensors” that process the readings at source, the compensator very accurately measures air temperature, air pressure and relative humidity. Changes in these conditions can affect the wavelength of the laser light and the measurement readings taken.
The XC-80 uses the sensor readings to modify the nominal value of the laser wavelength to give a true value, which is then used in calculations to virtually eliminate any measurement errors resulting from these variations. If you are interested in accuracy you NEED effective wavelength compensation.
Key features of XC-80 include:
• Uniform compensation – The design of the XC-80 and sensors ensures uniform and extremely accurate readings over the full range of environmental operating conditions.
• Frequent sensor updates – This can be done automatically every seven seconds, as indicated by LED status lights on the XC-80 unit.
• Integrated USB – The integral USB connection means there is no separate PC interface and no separate power supply (the USB supplies the XC-80 and sensors’ power).
• Lightweight – The XC-80 weighs 550 g, and together with the XL-80, weighs just over 3 kg (including connecting cables, XL power supply and sensors).
• Intelligent air and material temperature sensors – The integral microprocessors analyse and process the sensor’s output before sending digital temperature values to the XC-80 compensator. This offers more secure measurements and is a key reason why the XC-80 is so compact and also ensures sensors are fully interchangeable without comprimising accuracy.
• Up to three material temperature sensors can also be attached to the XC-80 compensator to allow linear measurements to be normalised to a standard material temperature of 20 °C.
• Versatile sensor cables – The standard 5 m long sensor cables are detachable for easy replacement and can be screwed together for extended lengths on longer machines.
Note: Environmental compensation is NOT required for angular or straightness measurements when using a Renishaw system as these are calculated from differences in two beam paths close together, where the environmental factors self cancel. As rotary axis, flatness and squareness measurements are also based on these measurements they also do not require environmental compensation.